BIOS EBDA/lowmem at: 0009f800/0009f800 Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Jan 4 18:05:22 UTC 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005f680000 (usable) BIOS-e820: 000000005f680000 - 000000005f68e000 (ACPI data) BIOS-e820: 000000005f68e000 - 000000005f700000 (ACPI NVS) BIOS-e820: 000000005f700000 - 0000000060000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x5f680 max_arch_pfn = 0x100000 Scanning 2 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000006000 (reserved) modified: 0000000000006000 - 0000000000007000 (usable) modified: 0000000000007000 - 0000000000010000 (reserved) modified: 0000000000010000 - 0000000000092800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000005f680000 (usable) modified: 000000005f680000 - 000000005f68e000 (ACPI data) modified: 000000005f68e000 - 000000005f700000 (ACPI NVS) modified: 000000005f700000 - 0000000060000000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fed00000 - 00000000fed00400 (reserved) modified: 00000000fed14000 - 00000000fed1a000 (reserved) modified: 00000000fed1c000 - 00000000fed90000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ff000000 - 0000000100000000 (reserved) kernel direct mapping tables up to 377fe000 @ 10000-16000 RAMDISK: 5f501000 - 5f66fcbd Allocated new RAMDISK: 0055f000 - 006cdcbd Move RAMDISK from 000000005f501000 - 000000005f66fcbc to 0055f000 - 006cdcbc ACPI: RSDP 000F64F0, 0014 (r0 PTLTD ) ACPI: RSDT 5F687449, 0048 (r1 PTLTD Capell00 6040000 LTP 0) ACPI: FACP 5F68DE2E, 0074 (r1 Acer Grape 6040000 LOHR 5A) ACPI: DSDT 5F688098, 5D96 (r1 Acer CALISTGA 6040000 INTL 20050228) ACPI: FACS 5F68EFC0, 0040 ACPI: APIC 5F68DEA2, 0068 (r1 Acer Grape 6040000 LOHR 5A) ACPI: HPET 5F68DF0A, 0038 (r1 Acer Grape 6040000 LOHR 5A) ACPI: MCFG 5F68DF42, 003C (r1 Acer Grape 6040000 LOHR 5A) ACPI: APIC 5F68DF7E, 005A (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 5F68DFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 5F687BD6, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050228) ACPI: SSDT 5F687977, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228) ACPI: SSDT 5F687491, 04E6 (r1 PmRef CpuPm 3000 INTL 20050228) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: Local APIC address 0xfee00000 638MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00012000 - 00018f00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000055b520] TEXT DATA BSS ==> [0000100000 - 000055b520] #4 [000055c000 - 000055f000] INIT_PG_TABLE ==> [000055c000 - 000055f000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [000055f000 - 00006cdcbd] NEW RAMDISK ==> [000055f000 - 00006cdcbd] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] found SMP MP-table at [c00f6520] 000f6520 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0005f680 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x00000002 0: 0x00000006 -> 0x00000007 0: 0x00000010 -> 0x00000092 0: 0x00000100 -> 0x0005f680 On node 0 totalpages: 390661 free_area_init_node: node 0, pgdat c0406580, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3941 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 1278 pages used for memmap HighMem zone: 162180 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs PM: Registered nosave memory: 0000000000002000 - 0000000000006000 PM: Registered nosave memory: 0000000000007000 - 0000000000010000 PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) PERCPU: Allocating 36864 bytes of per cpu data NR_CPUS: 16, nr_cpu_ids: 2, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387607 Kernel command line: root=/dev/sda2 ro vga=773 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1596.256 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Scanning for low memory corruption every 60 seconds Memory: 1542632k/1563136k available (2228k kernel code, 19096k reserved, 1026k data, 332k init, 653832k highmem) virtual kernel memory layout: fixmap : 0xffee8000 - 0xfffff000 (1116 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0433000 - 0xc0486000 ( 332 kB) .data : 0xc032d139 - 0xc042db5c (1026 kB) .text : 0xc0100000 - 0xc032d139 (2228 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.53 BogoMIPS (lpj=5320853) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20080926 ACPI: Checking initramfs for custom DSDT ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz stepping 08 APIC calibration not consistent with PM Timer: 173ms instead of 100ms APIC delta adjusted to PM-Timer: 831249 (1440828) Brought up 1 CPUs Total of 1 processors activated (3193.53 BogoMIPS). net_namespace: 768 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE storm detected, transactions will use polling mode ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xd0100000-0xd017ffff] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0200000-0xd023ffff] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0180000-0xd01fffff] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0240000-0xd0243fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0444000-0xd04443ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:06:01.0: reg 10 32bit mmio: [0xd0000000-0xd0001fff] pci 0000:06:01.0: supports D1 D2 pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:01.0: PME# disabled pci 0000:06:02.0: reg 10 32bit mmio: [0xd0002000-0xd0003fff] pci 0000:06:04.0: reg 10 32bit mmio: [0xd0004000-0xd0004fff] pci 0000:06:04.0: supports D1 D2 pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:04.0: PME# disabled pci 0000:06:04.1: reg 10 32bit mmio: [0xd0005000-0xd000507f] pci 0000:06:04.1: supports D1 D2 pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.1: PME# disabled pci 0000:06:04.2: reg 10 32bit mmio: [0xd0005400-0xd00054ff] pci 0000:06:04.2: supports D1 D2 pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.2: PME# disabled pci 0000:06:04.3: reg 10 32bit mmio: [0xd0005800-0xd000587f] pci 0000:06:04.3: supports D1 D2 pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.3: PME# disabled pci 0000:06:04.4: reg 10 32bit mmio: [0x000000-0x0000ff] pci 0000:06:04.4: supports D1 D2 pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot pci 0000:06:04.4: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xd0000000-0xd00fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) PCI: Using ACPI for IRQ routing pci 0000:00:1c.0: BAR 7: can't allocate resource pci 0000:00:1c.0: BAR 8: can't allocate resource NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0x1640-0x164f has been reserved system 00:06: ioport range 0xfe00-0xfefe has been reserved system 00:06: ioport range 0xff2c-0xff2f has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: disabled pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07 pci 0000:06:04.0: IO window: 0x002000-0x0020ff pci 0000:06:04.0: IO window: 0x002400-0x0024ff pci 0000:06:04.0: PREFETCH window: 0x68000000-0x6bffffff pci 0000:06:04.0: MEM window: 0x6c000000-0x6fffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0x2000-0x2fff pci 0000:00:1e.0: MEM window: 0xd0000000-0xd00fffff pci 0000:00:1e.0: PREFETCH window: 0x00000068000000-0x0000006bffffff pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0004 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 02 index 0 mmio: [0x0-0xfff] bus: 02 index 1 mmio: [0x0-0xfffff] bus: 02 index 2 mmio: [0x0-0x0] bus: 02 index 3 mmio: [0x0-0x0] bus: 03 index 0 mmio: [0x0-0x0] bus: 03 index 1 mmio: [0x0-0x0] bus: 03 index 2 mmio: [0x0-0x0] bus: 03 index 3 mmio: [0x0-0x0] bus: 04 index 0 mmio: [0x0-0x0] bus: 04 index 1 mmio: [0x0-0x0] bus: 04 index 2 mmio: [0x0-0x0] bus: 04 index 3 mmio: [0x0-0x0] bus: 05 index 0 mmio: [0x0-0x0] bus: 05 index 1 mmio: [0x0-0x0] bus: 05 index 2 mmio: [0x0-0x0] bus: 05 index 3 mmio: [0x0-0x0] bus: 06 index 0 io port: [0x2000-0x2fff] bus: 06 index 1 mmio: [0xd0000000-0xd00fffff] bus: 06 index 2 mmio: [0x68000000-0x6bffffff] bus: 06 index 3 io port: [0x00-0xffff] bus: 06 index 4 mmio: [0x000000-0xffffffff] bus: 07 index 0 io port: [0x2000-0x20ff] bus: 07 index 1 io port: [0x2400-0x24ff] bus: 07 index 2 mmio: [0x68000000-0x6bffffff] bus: 07 index 3 mmio: [0x6c000000-0x6fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 1467k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1740 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 767 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pcieport-driver 0000:00:1c.1: irq 766 for MSI/MSI-X pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pcieport-driver 0000:00:1c.2: irq 765 for MSI/MSI-X pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pcieport-driver 0000:00:1c.3: irq 764 for MSI/MSI-X pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 1536k, total 7872k vesafb: mode is 1024x768x8, linelength=1024, pages=9 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 332k freed input: AT Translated Set 2 keyboard as /class/input/input1 SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata1.00: ATA-6: HTS541010G9AT00, MBZOA60A, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PP02, max UDMA/33 ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/33 ata2: port disabled. ignoring. scsi 0:0:0:0: Direct-Access ATA HTS541010G9AT00 MBZO PQ: 0 ANSI: 5 scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PP02 PQ: 0 ANSI: 5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb uhci_hcd: USB Universal Host Controller Interface driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0444000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB) uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected sda1 sda2 sda3 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 usb 2-4: new high speed USB device using ehci_hcd and address 2 usb 2-4: configuration #1 chosen from 1 choice device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds usb 5-1: new low speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US b43-pci-bridge 0000:06:02.0: enabling device (0000 -> 0002) b43-pci-bridge 0000:06:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 b43-pci-bridge 0000:06:02.0: setting latency timer to 64 ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0 b43-phy0: Broadcom 4318 WLAN found phy0: Selected rate control algorithm 'pid' Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ] b44 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 b44 0000:06:01.0: setting latency timer to 64 ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 b44.c:v2.0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:16:d4:1c:63:a2 p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input3 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (68 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (68 C) Marking TSC unstable due to TSC halts in idle ACPI: WMI: Mapper loaded acer-wmi: Acer Laptop ACPI-WMI Extras acer-wmi: Brightness must be controlled by generic video driver Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: Video Bus as /class/input/input6 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04 iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Linux video capture interface: v2.00 gspca: main v2.3.0 registered gspca: probing 0402:5602 ALi m5602: Probing for a po1030 sensor ALi m5602: Probing for a mt9m111 sensor ALi m5602: Probing for a s5k4aa sensor ALi m5602: Probing for an ov9650 sensor ALi m5602: Probing for a s5k83a sensor sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 0:0:1:0: Attached scsi generic sg1 type 5 ALi m5602: Detected a s5k83a sensor i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x18a0-0x18bf] conflicts with ACPI region SMBI [0x18a0-0x18af] ACPI: Device needs an ACPI driver intel_rng: FWH not detected gspca: probe ok usbcore: registered new interface driver ALi m5602 ALi m5602: registered input: PC Speaker as /class/input/input7 yenta_cardbus 0000:06:04.0: CardBus bridge found [1025:0090] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:06:04.0: TI: mfunc 0x90501212, devctl 0x44 Error: Driver 'pcspkr' is already registered, aborting... sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000 input: SynPS/2 Synaptics TouchPad as /class/input/input8 yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16 yenta_cardbus 0000:06:04.0: Socket status: 30000006 pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean. yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd00fffff yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window: 0x68000000 - 0x6bffffff sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17 mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO input: A4Tech PS/2+USB Mouse as /class/input/input9 a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.3-1/input0 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 208804k swap on /dev/sda6. Priority:-1 extents:1 across:208804k Clocksource tsc unstable (delta = -442753252 ns)